Yuku free message boards

You can buy 3/8" hose anywhere (Probably gonna have 25 bucks into hose alone - for the length that you need).

Then you gotta locate your hull fittings - unless you have another "donor ski".

Then based on the research / experience that Steve used to develop this kit - analyzing that the stated 90* head fittings were a "problem" point in the system - and these head fittings increased the probability of a clog - due to a sucked-up weed, cigarette butt, or something else - maybe just "crud" build-up, then trying something off-the shelf caused overheating problems due to improper cooling/flow characteristics and eventually developing a set of head fittings that are all based on the stock flow characteristics.

If you locate a fitting "locally" that will screw into your cylinder head - it's gonna have a different diameter and will cause the cylinder to not be cooled properly - and you're gonna open-up another "can" of issues.

Plus his hull fittings are sweeeeeeeet. They are all anodized black and all match in design, and fit. Plus he includes instructions.

I am pretty certain that Steve's not gonna retire on sales of his Ultra-150 Tripple Pisser Kit - so just stick with what you got or "suck it up" and write a check for a measly 75 beans.

Good Luck....

PS - Remember Steve floats the bill for us to be able to use this BB - which allows us all to "share" information in one forumn, so we should support this alone - as just maybe someday - it may go away.