Can't get pump off ski

Author

Comment

hunting080189

Lead

[-]

Posts: 56

(03/17/09 09:42)

Tags : None

I need to take my pump off my ski to replace the bearing but when I went to take it off I can't get it to move soaked it up with PB Blaster and let it sit nothing. Any sugesstions on a easy way to get this pump off?

Nick
2000 Ultra 150

btldigger

[-]

Posts: 962

(03/17/09 11:41)

Moderator

Try checking this thread out.

http://ultra150.yuku.com/topic/2580

Morris

Ultra mods http://www.ultra150.yuku.com/topic/2494

hunting080189

[-]

Posts: 57

(03/18/09 09:06)

Thanks for the link I'll give some of those sugesstions a try

Nick
2000 Ultra 150

johnson7454

[-]

Posts: 9

(03/18/09 04:06)

also you can get a slide hammer with a flat hook on the end and hammer pull on all four corners. There is just enough lip behind the bolt holes to grab on to. It does the job for me every time.

kard150

[-]

Posts: 4445

(03/19/09 04:56)

Moderator

Don't forget the two bolts thru the rideplate. Ken

hunting080189

[-]

Posts: 60

(03/23/09 03:00)

yea i remembered them but thanks for the info

Nick
2000 Ultra 150

skiworxx

[-]

Posts: 190

(03/24/09 08:40)

Site Owner

Yea, they can be really tough sometimes.. Specially FL and North East area boats.. We use a slide hammer but one of our customers from FL made a puller that worked really well.. Good luck with that and make sure you use the new style seals so you don't have to do this again for a while..

Steve, Ultra 150 & 250.com Administrator/Owner

E-mail Steve@skiworx

hunting080189

[-]

Posts: 61

(03/24/09 11:09)

yea thanks, I got the new seals

Nick
2000 Ultra 150

Yuku free message boards

Quick links

Can't get pump off ski

Can't get pump off ski

Quick Reply